Duc-Tite®

  

 
Pipe size: 3″- 20″ diameters,  20’ or 18′ nominal lengths
Temperature range: 35ºF to 250ºF
Max. operating pressure: 150psi
Carrier: Ductile iron (Push-On , Mechanical Joint, Restrained Joint)
Insulation: Polyurethane foam 
Casing: Heavy wall PVC (PIP80, 80lbs)
             Options: PVC Industry standard (PIP22, 22lbs)                                                                                    

                             HDPE

                             Fiberglass

Duc-Tite is a rugged gasketed ductile iron piping system for low temperature hot water or chilled water service.

Duc-Tite is a easy to install, energy efficient quality piping system with a push-on type joint. The carrier pipe is Class 52 for 3″ & 4″ and Class 50 for 6″ through 20″ ductile iron pipe. Insulation is a thermally efficient polyurethane foam with a ‘K’ factor of 0.16 at 70ºF. The heavy wall PVC casing and heavy duty compression end seals prevent ground water infiltration.

In the field, the system is easily adaptable to other materials with commercially available fittings. Fittings are un-insulated ‘push-on’ cast iron designed to be used with the carrier pipe. Rubber ring ‘push-on’ fittings make changes in direction simple. 

                                    Duc-Tite® Joint

 

 

The Duc-Tite joint provides for expansion and contraction through the use of a rubber sealing ring placed in the groove of the bell. The joint compensates for expansion, contraction, and earth movement without addition stress on the pipe. There is no need for loops or other expansion devices.